-Body of pneumatic flush mechanism (ABS) full set DUO SPEK 2" with adjustable overflow, float and yellow rotating nut.
-Button DUO SPEK No 2/7E HD (FLAT) (Code 20703)
-Two silicone PVC pipe 33cm and 28cm.
-Base rubber for replacement mechanism
-Inside DUO SPEK single carton box
INSTALLATION
-The water level must cover the float
-The silicone pipes (as shown at diagrams on the left)
-The flange from the sealing rubber goes to the bottom of the base of the cistern.
-Body of pneumatic flush mechanism (ABS) full set DUO SPEK 2" with adjustable overflow, float and yellow rotating nut.
-Button DUO SPEK No 2/7 HD (Code 20700)
-Two silicone PVC pipe 33cm and 28cm.
-Base rubber for replacement mechanism
-Inside DUO SPEK single carton box
INSTALLATION
-The water level must cover the float
-The silicone pipes (as shown at the diagram on the left)
-The flange from the sealing rubber goes to the bottom of the base of the cistern
-Body of pneumatic flush mechanism full set ABS (clipped) with adjustable overflow.
-Yellow plastic nut (adapter) -Button No 7E H.D. (Code 10795)
-Silicone tube or pipe 33cm
-Sealing rubber.
-Inside plastic bag
INSTALLATION
-Place the rubber on the base with the flange down (downwards)
-Screw the adapter on the base by tightening slightly.
-Fit by rotating the body of the mechanism in one of the four positions of the adapter.
Body of pneumatic flush mechanism full set ABS (clipped) with adjustable overflow.
Yellow plastic nut (adapter) Button No 2 H.D. (Code 10205)
Silicone PVC pipe 33cm
Sealing rubber.
Inside plastic bag
INSTALLATION
-Place the rubber on the base with the flange down (downwards)
-Screw the adapter on the base by tightening slightly.
-Fit by rotating the body of the mechanism in one of the four positions of the adapter.
-Body of pneumatic flush mechanism full set ABS (clipped) with adjustable overflow.
-Yellow plastic nut (adapter) -Button No 1 H.D. (Code 10105)
-Silicone PVC pipe 33cm..
-Sealing rubber.
-Inside plastic bag
INSTALLATION
-Place the rubber on the base with the flange down (downwards)
-Screw the adapter on the base by tightening slightly.
-Fit by rotating the body of the mechanism in one of the four positions of the adapter.
